You shouldn't use MAC Address filter on router
MAC address is easy to access through the packet sent over the network. Hacker can monitor the network packet within 2 or 3 sec. and know the MAC address, after changing the device MAC the hacker can enter in your network. Changing the MAC address is not big deal. So if you are allowing the client through their MAC address filter without any extra layer of security then your network might not be secure.
If You want to use "MAC Address Filter" you must use "WPA2-PSK"
What is "MAC Address Filter"
When you provide access of your Wi-Fi to guest user. you have to tell Wi-Fi password. The guest user do not join network again for which you have to change Wi-Fi password and it might be difficult to remember changed password. Here is a solution to free from Wi-Fi password.
If You want to use "MAC Address Filter" you must use "WPA2-PSK"
What is "MAC Address Filter"
When you provide access of your Wi-Fi to guest user. you have to tell Wi-Fi password. The guest user do not join network again for which you have to change Wi-Fi password and it might be difficult to remember changed password. Here is a solution to free from Wi-Fi password.
Note: First of all it's for 10-30 user in small network where security is not much concerned.
How it works:
Every LAN card, Smartphone or other internet access devices have unique address, That is MAC address. You will have to create MAC Address Filter on Wi-Fi router and allow access them.
Step by Step process:
Huawei Wi-Fi Router Explained:
1. Go to the settings of router
2. Security mode: None
3. then go to the WLAN MAC filter as described below.
4. Add MAC address of PC/Laptop on which you are accessing this router and add MAC address of those, whom you want to give access of Wi-Fi. And then click on "apply" to save settings.
____________________________________________________
Comments
Post a Comment
Thanks to write us